DUET 90 - BEST FASTENERS FOR TERRACES
DUET 90 fasteners are intended for installation of planks of any shape on horizontal and vertical surface. Their flat surface has no sharp cutting edges, while in operation no service required. Installation is facilitated by using the start DUET to fix the first board.
Application: for decking planks, for terrace planks, straight planken, beveled (rhomb) planken, timber imitation, block house.
Maximum load: 200 кг
Fasteners price DUET 90, ruble./pair
* - if density of wood sheathing is >600, spotting is required for screw insertion
** - depending on wood moisture at the time of installation and operating conditions
Only pan-head jack point screws are allowed.
Installation on metal framework is feasible
Cпособ монтажа террасной доски с использованием ДУЭТ90
Quantity per unit pack
|up to 500||501 - 1500||1501 - 5000||more than 5000|
|10110000PA00WG03||крепеж ДУЭТ 90, ПА6||пара||200||26,00||25,50||24,50||24,00|
Quantity: 200 pairs in cardboard box
Volume: 200 x 200 x 400 mm3
Weight: 5.5 kg
Material: Капролон стеклоармированный ПА6
Монтаж террасной доски на крепеж Duet90
|Plank width, mm||
Distance between posts (boarding joist) centers, mm
Mounting clearance*, mm
|Standard consumption per sq. m|
|DUET 90, пара||
screw No.1, piece
|screw No.2, piece|
DUET design features
DUET is made from a composite polymeric material, no moisture condensation, provides terrace durability due to efficient ventilation of the hidden part of the structure. It facilitates the installation by the available mounting stopper for accurate positioning in relation to board edge. It compensates swelling and shrinkage of the sheathing plank without curling damage, may be employed with planks 90-200 mm wide.
Location of bolt head in the fastener recess provides an ideally flat surface of façade.
DUET90 variation from DUET70 and DUET-façade
- In structural terms DUET90 fasteners are most convenient for installation of rectangular planks (decking, terrace).
- They allow for mounting planks from wood with high density and thickness over 35 mm. To do this, an additional screw and an additional mounting hole are used.
- DUET90 can be used for mounting a bearing plank on the bearing base up to 50 mm width.
- Owing to its shape DUET90 has an elevated load carrying ability which allows for using it for attachment of planks in horizontal structures.
- Screws 4.5 mm in diameter may be used together with DUET90 for fixing a plank 25-35 mm thick.
- The shape of fasteners is most suitable for ventilation of horizontal structures.
Как крепить заборную доску?ИНСТРУКЦИЯ ПО КРЕПЛЕНИЮ ЗАБОРНОЙ ДОСКИ
Are there any questions? Make a query and we’ll answer without fail!