DUET FAÇADE - FASTENERS FOR FAÇADE AND FENCE
DUET FAÇADE is intended for installation of planks of any shape, has a flat surface with no sharp cutting edges, easy to mount, while in operation no service required. Installation is facilitated by using the start DUET to fix the first board.
Application: for straight planken, beveled (rhomb) planken, timber imitation, block house.
Maximum load: 130 kg
Fasteners price DUET FAÇADE, ruble./pair
* - if density of wood sheathing is >600, spotting is required for screw insertion
** - depending on wood moisture at the time of installation and operating conditions
Only pan-head jack point screws are allowed.
Installation on metal framework is feasible
Способ монтажа крепежа ДУЭТ-фасад
Quantity per unit pack
|up to 500||501 - 1500||1501 - 5000||more than 5000|
|10090000PA00WG03||Fastener DUET FACAD, ПА6||пара||200||24,50||24,00||23,00||22,50|
Quantity: 200 pairs in cardboard box
Volume: 200 x 200 x 400 mm3
Weight: 6 kg
Material: Капролон стеклоармированный ПА6
Порядок монтажа террасы с использованием крепежа ДУЭТ- фасад
|Plank width, mm||
Distance between posts (boarding joist) centers, mm
Mounting clearance*, mm
|Standard consumption per sq. m|
|DUET FAÇADE, пара||
screw No.1, piece
|screw No.2, piece|
It is advised to use these fasteners in heavily loaded horizontal flooring, ventilated wooden facades from straight and beveled planken, timber imitation and block house. This fastening element provides the required structural strength and is practically invisible.
DUET Façade was tested in the laboratory SPb GASU by a special procedure. During testing the fastening point was subjected to dynamic loads to failure, namely shear and pull-out tests. The test results were documented in form of the report and video recorded
In structural terms DUET Façade fasteners are made from composite polymeric material, no moisture condensation, provide facade durability due to efficient ventilation of the rear side of sheathing board. It consists of two connecting independent elements and is intended for installation of planks on vertical and ceiling constructions.
No need of anti-corrosion protection.
It facilitates the installation due to the mounting stopper for accurate positioning in relation to board edge. It compensates swelling and shrinkage of the sheathing plank without curling damage, may be employed with sheathing planks 90-200 mm wide. Location of bolt head in the fastener recess provides an ideally flat surface of façade.
Variation of DUET Façade from DUET 70
Due to its more elastic construction DUET Façade fastener is most suitable for using with wider and thinner planks. The elasticity of fasteners allows for using screws with the diameter of 4.0 mm.
Are there any questions? Make a query and we’ll answer without fail!