Jack point screws with metal drill
Jack point screws with metal drill (counterpart of screw according to DIN 7504), TORX slot. They are intended for fixing different materials to sheet metal without preliminary drilling. Screws with drill are used for attachment to bearing metal profile.
- Jointly with DUET fasteners – pan head
- jointly with VOLNA fasteners – countersunk head
- jointly with PRO fasteners at vertical position of jack point screw
Screws with drill can be used for fixing DUET system to rear side of thermally treated (thermally modified) façade plank.
Price
| from 1.96 rub/ piece |
В связи с колебаниями курса евро/рубль просим уточнять актуальность указанной цены
Цены на саморезы с буром по металлу
| Code number | Name | Measuring unit,mm | Slot | Coating | Package | Quantity per unit pack | Package Weight, kg | Price, rub / piece. |
|---|---|---|---|---|---|---|---|---|
| Саморез с буром по металлу, скругленная голова, шлиц Torx, PZ | ||||||||
| 20164216WHPZRD2 | Саморез с буром по металлу, скругленная голова, PZ | 4,2x16 | PZ2 | Цинк | Малая | 1000 | 2,01 | |
| 20164219WHPZRD2 | Саморез с буром по металлу, скругленная голова, PZ | 4,2x19 | PZ2 | Цинк | Малая | 1000 | 2,12 | |
| 20164219WHTXRD2 | Саморез с буром по металлу, скругленная голова, шлиц Torx | 4,2x19 | Torx 20 | Цинк | Малая | 1000 | 2,12 | |
| 20164819WHPZRD2 | Саморез с буром по металлу, скругленная голова, PZ | 4,8x19 | PZ2 | Цинк | Средняя | 1000 | 2,83 | |
| 20164819WHTXRD2 | Саморез с буром по металлу, скругленная голова, шлиц Torx | 4,8x19 | Torx 25 | Цинк | Средняя | 1000 | 2,95 | |
| Саморез с буром по металлу, потайная голова, PZ | ||||||||
| 20174216WHPZRD2 | Саморез с буром по металлу, потайная голова, PZ | 4,2x16 | Torx 20 | Цинк | Малая | 1000 | 1,96 | |
Package
Volume: 200 х 100 х 100 mm3
Volume: 400 х 200 х 200 mm3
Drawing of jack point screw with pan head
Dimension sheet
| L length, mm | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Jack point screw with drill, pan head, TORX slot | ||||||||||||||||
| d, мм | dk, мм | Шпиц | 9,5 | 13 | 16 | 19 | 22 | 25 | 32 | 38 | 45 | 50 | ||||
| 3,5 | 6,9 | Torx 15 | + | + | + | + | ||||||||||
| 3,9 | 7,5 | Torx 20 | + | + | + | + | + | + | ||||||||
| 4,2 | 8,2 | Torx 20 | + | + | ➕ | + | + | + | + | |||||||
| 4,8 | 9,5 | Torx 25 | + | + | ➕ | + | + | + | + | + | + | |||||
| ➕ | Рекомендуется для систем крепления дуэт и волна | |||||||||||||||
| + | Белый цинк | |||||||||||||||
Drawing of jack point screw with countersunk head
Jack point screw with countersunk head
|
Jack point screw with drill, countersunk head, TORX slot | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d, мм | dk, мм | Шпиц | 9,5 | 13 | 16 | 19 | 22 | 25 | 32 | 38 | 45 | 50 | ||||
| 3,9 | 7,5 | Torx 20 | + | + | + | + | + | |||||||||
| 4,2 | 8,1 | Torx 20 | ➕ | + | + | + | + | |||||||||
| 4,8 | 9,5 | Torx 25 | + | + | + | + | + | + | ||||||||
| ➕ | Рекомендуется для систем крепления дуэт и волна | |||||||||||||||
| + | Белый цинк | |||||||||||||||
| Metal thickness, mm from/to | d, мм |
|---|---|
| 0,7/2,25 | 3,5 |
| 0,7/2,4 | 3,9 |
| 1,75/3,0 | 4,2 |
| 1,75/4,4 | 4,8 |
Specific features of installation
In installation of this type of screw a torque limiter on wrench must be used. Otherwise, the body of screw may be distorted due to contact of head with metal surface.
Features of jack point screw with drill
-
TORX slot provides stability of screw in tightening and reliable force transfer from wrench to fastener.
-
Jack point screw has a hardened (up to required degree) surface which makes possible to use it time and again.
-
Hardened surface of drill provides steady drilling into unhardened sheet cold-rolled and hot-rolled metal.
-
Drill length is optimized for a certain range of metal thickness.
Are there any questions? Make a query and we’ll answer without fail!